RCTOOLS 4.2 for Softimage 2011

Discussions concerning plugins for SOFTIMAGE©
User avatar
Hirazi Blue
Administrator
Posts: 5107
Joined: 04 Jun 2009, 12:15

RCTOOLS 4.2 for Softimage 2011

Post by Hirazi Blue » 23 Jun 2010, 14:06

Stephen Blair has compiled a 64 bit Softimage 2011 compatible version of "rctools 4.2".
You'll find it at his eX-SI Support Blog: go there now
:-bd

So what are the rctools you ask:
the rctools are a venerable package of
"advanced selection tools and filters for Softimage|XSI"
(and now for Softimage also, obviously)
written by Reinhard Claus (rray)...
Stay safe, sane & healthy!

crude
Posts: 27
Joined: 04 Jun 2009, 11:04
Skype: dacrude
Location: Germany

Re: RCTOOLS 4.2 for Softimage 2011

Post by crude » 30 Jun 2010, 13:25

great news :D
got problems with sp1 32 bit. hope i find a solution.

User avatar
Hirazi Blue
Administrator
Posts: 5107
Joined: 04 Jun 2009, 12:15

Re: RCTOOLS 4.2 for Softimage 2011

Post by Hirazi Blue » 30 Jun 2010, 15:51

NONSENSE ALERT:
as Stephen Blair points out in the following post, this post is incorrect...


Don't know, if this will help, but the "xsiaddon" Stephen Blair uploaded might be advertised as "for 64 bit", but does seem to include the 32 bit version also (as far as I can tell from studying the xml, as I don't have any 32 bit OS with SI installed at hand to properly test this).
;)
Stay safe, sane & healthy!

User avatar
xsisupport
Posts: 713
Joined: 09 Jun 2009, 11:02
Location: Montreal Canada
Contact:

Re: RCTOOLS 4.2 for Softimage 2011

Post by xsisupport » 30 Jun 2010, 16:42

Hirazi Blue wrote:Don't know, if this will help, but the "xsiaddon" Stephen Blair uploaded might be advertised as "for 64 bit", but does seem to include the 32 bit version also (as far as I can tell from studying the xml, as I don't have any 32 bit OS with SI installed at hand to properly test this).
;)
Nope, I didn't compile the 32-bit version of RCFilters yet.
// Steve Blair
// "You're not a runner, you're just a guy who runs" -- my wife
//
// My Blogs: Arnold | Softimage

User avatar
Hirazi Blue
Administrator
Posts: 5107
Joined: 04 Jun 2009, 12:15

Re: RCTOOLS 4.2 for Softimage 2011

Post by Hirazi Blue » 30 Jun 2010, 19:22

I stand corrected...
As there seemed to be SOME 32.dll's in the xsiaddon I wrongfully assumed all of them were available.
Stay safe, sane & healthy!

crude
Posts: 27
Joined: 04 Jun 2009, 11:04
Skype: dacrude
Location: Germany

Re: RCTOOLS 4.2 for Softimage 2011

Post by crude » 30 Jun 2010, 20:07

ok good to know !!
i need many other plugs which runs only with 32bit...so i cant change to 64bit again...

User avatar
xsisupport
Posts: 713
Joined: 09 Jun 2009, 11:02
Location: Montreal Canada
Contact:

Re: RCTOOLS 4.2 for Softimage 2011

Post by xsisupport » 30 Jun 2010, 20:13

I'll try to get the 32-bit version out some time in the next couple of days.
// Steve Blair
// "You're not a runner, you're just a guy who runs" -- my wife
//
// My Blogs: Arnold | Softimage

crude
Posts: 27
Joined: 04 Jun 2009, 11:04
Skype: dacrude
Location: Germany

Re: RCTOOLS 4.2 for Softimage 2011

Post by crude » 01 Jul 2010, 11:52

great news !

User avatar
xsisupport
Posts: 713
Joined: 09 Jun 2009, 11:02
Location: Montreal Canada
Contact:

Re: RCTOOLS 4.2 for Softimage 2011

Post by xsisupport » 08 Jul 2010, 18:43

The 32-bit version of rctools is available.
// Steve Blair
// "You're not a runner, you're just a guy who runs" -- my wife
//
// My Blogs: Arnold | Softimage

User avatar
rray
Moderator
Posts: 1774
Joined: 26 Sep 2009, 15:51
Location: Bonn, Germany
Contact:

Re: RCTOOLS 4.2 for Softimage 2011

Post by rray » 09 Jul 2010, 11:02

Thanks again for your work on compiling this! I regularly failed at getting the c# part to compile properly.
:-bd
softimage resources section updated Jan 5th 2024

crude
Posts: 27
Joined: 04 Jun 2009, 11:04
Skype: dacrude
Location: Germany

Re: RCTOOLS 4.2 for Softimage 2011

Post by crude » 20 Jul 2010, 12:45

got an error again with the 32bit version.

Code: Select all

' ERROR : Objekt erwartet - [line 124 in C:\Users\design03\Autodesk\Softimage_2011_SP1\Addons\RCTools\Application\Plugins\rcPopupPlugin.js]
' ERROR : 2006-CUST-rcPopup - Unexpected failure.
rcPopup

Code: Select all

iCmd = DisplayPop ("&Complete all loops;&Walk loop (rcLoopWalk);&other loop ops[&Complete all loops (around corners);Complete all edge&rings;---;&Grow loops (rcLoopGrow);&Shrink loops (rcLoopShrink);---;Grow to &Island];" 

g.m.
Posts: 9
Joined: 05 Jun 2010, 00:45
Location: London

Re: RCTOOLS 4.2 for Softimage 2011

Post by g.m. » 20 Jul 2010, 20:56

I got the same error message, just install xPOP2 and it will work. You can download it from rray.de .

crude
Posts: 27
Joined: 04 Jun 2009, 11:04
Skype: dacrude
Location: Germany

Re: RCTOOLS 4.2 for Softimage 2011

Post by crude » 04 Aug 2010, 10:01

Thanks you for help,
Now it's work fine :) but got an error message on startscreen (error with the rctool filter) mhhh...
Anyway love this plug.

User avatar
Hirazi Blue
Administrator
Posts: 5107
Joined: 04 Jun 2009, 12:15

Re: RCTOOLS 4.2 for Softimage 2011

Post by Hirazi Blue » 04 Aug 2010, 10:14

Could you please post the text of the error message you're getting?

Could it be the one concerning the "rcCustomFilterSettings" Stephen Blair mentions in the comments to the 64bit version of this plugin?
To get rid of the “ERROR : 2356 – This plug-in is not installed: rcCustomFilterSettings” delete %XSI_USERHOME%\Data\Preferences\Custom Filters (RCTools).Preset.
(quoted from here)
Stay safe, sane & healthy!

j3st3r
Posts: 121
Joined: 11 Jun 2009, 09:13

Re: RCTOOLS 4.2 for Softimage 2011

Post by j3st3r » 05 Aug 2010, 11:54

RCTools crashes Softimage 2011 SP1 whenever I try to complete a loop (or all)

j3st3r
Posts: 121
Joined: 11 Jun 2009, 09:13

Re: RCTOOLS 4.2 for Softimage 2011

Post by j3st3r » 05 Aug 2010, 12:13

Resolved via deleting the old preferences file as well...

Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests